1. engineering

Bogs Paddleducks

My build log of Bogstandard's Paddleducks Marine twin cylinder, double acting, steam engine.
Full build log can be found http://madmodder.net/index.php?topic=1525.0
Read More
Centering the flywheel on the rotary table
95 / 171

Centering the flywheel on the rotary table

7512

  • Bearing blocks with ballraces to be fitted
  • Boring the bearing blocks to receive the ballraces
  • Bearing blocks with ballraces loosely fitted
  • Bearing blocks
  • Bottom plate marked up for drilling
  • Milling out the bottom plate
  • Bearing blocks in place
  • Brass bar for the crankwebs and flywheel
  • Parting off the crankweb blanks
  • Drilling the crank webs using a jig
  • All 4 crankwebs sliding together on 5mm and 4mm rods
  • Milling the crankwebs
  • Completed crankwebs and flywheel blank
  • Turning the flywheel
  • Centering the flywheel on the rotary table
  • Flywheel drilled
  • Milling flats on the crankshaft
  • Eccentrics part made
  • How I clamped the eccentrics to drill the offset hole
  • Clamping the eccentric to turn the boss
  • No Comments
  • Photo Sharing
  • About SmugMug
  • Browse Photos
  • Prints & Gifts
  • Terms
  • Privacy
  • Contact
  • Owner Log In
© 2022 SmugMug, Inc.